Alpina Kroon Mips® Ski Helmet moon

In the production process for Inmold helmets the inner shell is foam-injected underneath the outer shell under high heat. Thanks to the complete fusion of the upper and lower shells Inmold helmets are extremely stable and very light. In addition, they offer clearly more safety than spot-glued helmets.

All Alpina helmets that are manufactured using the inmold process have a robust ceramic shell. A polycarbonate plate is stretched under high heat to the shape of the future helmet and pressed onto the Hi-EPS body with high pressure and thermally bonded to it. The Ceramic Shell is characterized by several qualities: It is break- and scratch-resistant, UV-stable and antistatic.

The inner shell of all Inmold helmets consists of Hi-EPS (High Expanded Polystyrene). It is made up of a large number of microscopic air pockets which absorb the impact forces that act in a crash. In addition, HI-EPS absorbs neither water nor perspiration.

Edge Protect is an additional polycarbonate plate that give inmold helmets a touch of refinement. It covers the edges on the underside of the helmet. This protects the Hi-EPS and increases the helmet's durability.

Mips® is a system that provides protection against brain injuries that can be caused by rotational movements in an impact. The low-friction insert allows it to glide smoothly 10-15mm in any direction, thus reducing the rotational movement in the event of a fall. This gives Mips® extra protection.

A versatile adjustment system with a large, easy-grip two-component wheel and two large pressure absorbent pads at the rear of the head to give a perfect fit.

Proven a hundred thousand times over and used on all Alpina helmets: the strap buckle with the red push button and multi-step automatic locking mechanism. Ergomatic can be operated with one hand - you can loosen the strap on the way up the mountain and tighten it for downhill - and in a fall the locking mechanism cannot open automatically.

The Y-Clip connects the front and rear straps beneath the ear. Opening the clip enables the straps to be adjusted easily for a perfect fit.

To control the air stream, the vents in the helmet can be opened and closed using a sliding mechanism.

The changeable interior lining can be removed, hand-washed in tepid soap water and simply be inserted again.

Neck warmer that is pulled down low on the back of the helmet and made of comfortable, soft micro-fleece.