ATK Front 9 Touring Binding 91mm Brakes
The further development of the legendary ATK front stopper now available with DIN 4.0-9.0!
The perfect binding for demanding ski tourers and ski mountaineers - light, robust and with an always active stopper - whether ascent or descent! With a single movement of the hand, the binding and stopper are locked in place!
Stopper on the toe, patented toe piece in a closed construction with easy-entry geometry for even easier entry and without a visible spring: no more snow, ice or stones under the toe piece, outstanding lateral stability when descending, the locking lever also serves in the open position as a stop when entering the binding. Only 390g weight binding including stopper, made of the highest quality, CNC-machined 7075 aircraft aluminum.
You are just ordering these bindings without the skis?
Please inquire which width your ski has in the middle.
If you are insecure or your ski is out of the designated widths, our ski hotline will advise you.
Depending on the ski boot size and sidecut of your ski, the mounting point of the binding may change and thus the width of the ski may differ below the stopper.
DIN Range: 5.0-12.0
Adjustment 20mm
Built-in crampons slot assures the perfect insertion of any ATK® crampon size
Three Walking positions (flat, +26,5mm, +40mm)
Heel elastic travel: 10 mm (E.R.S.)
Easy Entry System
Cam Release System®
Automatic Brake System
Elastic Response System®
Suitable for Ski 1000g - 1700g (weight/ single ski)
Materials: Alu 7075, POM, Stainless Steel
Ski brake width: 91mm- suitable for 87mm - 91mm ski width
Weight/binding incl. ski brake: 390g
Brand No.: XFN9.091
Easy Entry System
This system is characterized by a new geometry of the toe part elements.
Super easy and confident step in on the toe part, with any tech boot available on the market, even in case of worn out soles.
Automatic Brake System
The first ski touring brake with automatic activation!
Automatic activation: when the toe piece is locked for the up-hill action through the front lever activation, the ski-brake is automatically recalled on the ski ready to open again in case of boot release (after a fall release or a voluntary activation of the brake).
Innovative design that optimizes the ergonomics in order to reduce the snow friction over the toe piece while skiing
Cam Release System®
The king of the ATK® patented systems! The CAM RELEASE SYSTEM® is fitted inside of our touring bindings heels in order to drive the boot step-in and vertical release in case of fall. A special CAM profile is pressed towards the heel pins by a pre-tensioned spring: when the step-in or a fall release occur, the pins are forced to go through the CAM profile which provides a precise resistance to the pin release, depending on the release value set on the binding.
-Provides the most stable downhill performances on the market with consistent reduction of bootorsion compared to any other tech heel part
- Extremely precise release performance
- Provides the softest heel step in of the industry
- Small dimensions compared to performance and astonishing lightweight
Elastic Response System®
A spring is placed in between the base plate of the binding and the adjustment screw. When the ski bents under the effect of a compression or a jump, the heel part can slide backward with an elastic travel of 10 or 12 mm, depending on the binding.
- Grants the natural ski flex, also in case of big jumps/compressions
- Improves binding release performance when the binding is stressed
- Reduces the pressure on the ski-boot-binding system
External Content - Youtube Video
This is a placeholder for third party content, please click to activate.
The external provider might be able to collect user specific data by activating this content. For more information please check out our data protection.
External Content - Loadbee
This is a placeholder for third party content, please click to activate.
The external provider might be able to collect user specific data by activating this content. For more information please check out our data protection.