Faction Dictator 3.0 X 21/22 Freeski

Poplar is a light-coloured, medium-weight, durable softwood that flexes and pops nicely as well as having a whole load of vibration absorption capabilities. Used as the only wood in this core, it allows the ski to pop, butter and stomp like a park ski and also have enough torsional stability to grip impressively on the downhill.

7 fractions of a millimetre might not sound like much, but when it comes to edges, it adds up. The 2.5mm edges stack an extra 35% of height on top of Factions already super-durable standard 1.8mm edges. This extra steel gives the rider a pair of skis that are going to take more abuse and last longer.

A construction that places strips of protective material along the sides of each core, between the edge and the topsheet. Sidewalls provide the best possible edge hold and stability when the ski is engaged in a turn as well as protecting the woodcore, edges and topsheet from impact and outside damage.

Elliptical Radius Sidecut is made up of a longer radius underfoot and shorter radii in the tip and tail of the ski. The long radius underfoot means you can pivot faster and easier, while a shorter radius in the tip and tail result in seamless turn initiation. This sidecut allows for a wide variety of turns lengths and angles.

Micro-cap construction is a hybrid of a premium, sandwich sidewall construction fused with a lightweight, durable cap construction. With micro-cap, the sandwich construction provides awesome edge hold and torsional stability while the ski’s topsheet wraps around and meets the sidewall, protecting the fragile join that can be prone to chipping.

Boat flex" combines a stiffer tip and tail to help settle the skis at speed, with a softer mid section, for big-time pop on request Heavy rocker is best complemented by solid, stiffer tips and tails, to help settle the skis and power through variable snow. Additionally, the stiff tips absorb more vibration when skiers touch down after going airborne. Just add a touch more flex underfoot and it allows the skis to load up and POP on request

A carbon weave sandwiches the ski’s wood core, providing extra stability and torsional rigidity without adding bulk to the build. Feel confident when you're about to pop to the Moon. Between 8 and 12 strips of carbon, sandwiching either side of the ski’s woodcore, are laid unidirectionally, providing extra stability to the ski, without adding bulk to the build. Each carbon strip is woven into the fiberglass to provide strength and stiffness in the full length of the ski.

Carbon and rubber Stomp Pad absorbs vibration at high speeds and upon landing big airs. A 600mm-long, 15mm-wide carbon/rubber reinforcement underfoot, above the edge, adds strength where it matters most to this performance oriented ski. In addition to protecting the wood core from heavy-duty impact on rails, the carbon and rubber inlay adds stability and vibration absorption under your boots, so that stomped landings feel better, both for you and your skis.

We process only the best topsheet materials available and test them extensively to guarantee they will stand up to the toughest use. For a greener supply chain, materials are sourced from near our factories in Europe.